Copyright Planika Sp. z o.o.
www.planikafires.com
IG0150#05
29.06.2020
6
3.
INSTALLATION
3.1.
Box contents
•
1x complete gas fireplace
•
1x Touch panel (installed)
•
1x Remote control (if delivered)
•
4x AA Batteries
•
2x AAA Batteries (if remote delivered)
•
5x bag of decorative stones
•
1x magnetic gripper
•
1x 4 metre rubber gas linkage
–
installed (only LPG version)
•
1x pressure regulator (37mbar)
–
installed (only LPG version)
•
1x installation and user’s manual
3.2.
Unboxing and installation
•
The contents of the boxes need to be carefully unwrapped from the foam foil.
•
Remove the bags with decorative stones from the burner reservoir and place them away from it.
•
Remove the Styrofoam placed on the unit.
•
Carefully lift the appliance and pull out the glass shield wrapped in cardboard from the inside of the GaLiO Fire
Pit Corten.
•
Check the completeness of the elements with the contents list.
•
Make sure that the device
nor its elements weren’t damaged during the transportation (if they were, notify
the supplier).
•
Place GaLiO Fire Pit Corten on a flat, paved surface outside of the building, preferably on the place of final
installation. Leave sufficient space on the side of the appliance where control panel is located (minimum 1 m).
•
The decorative stones are to be scattered evenly around the reservoir to completely cover the burner of the
fireplace.
•
WARNING!!!
The stones may not cover or be placed inside the device protecting the ignition unit (Photo 1).
Photo 1