Planex PCi RX-35F, User Manual

Page: 22 / 23

33 32
Appendix B
Troubleshooting
Please consult the following troubleshooting information if you have
encountered a problem during installation or operation of this product.
■
The HDD case does not work properly: in Device Manager, I can see a
"!" symbol right next to the driver
● Please verify that the supplied AC adapter is attached to the HDD case.
The power adapter is always required whenever the HDD case is in use.
If the AC adapter is not attached yet, first remove the RX-35F from your
computer, attach the AC adapter to the HDD case, and then reattach the
RX-35F to the computer.
■
The computer does not detect the drive even though I have already
installed the driver.
● If you are using a newly purchased HDD, a DOS partition needs to be
created in the drive and it needs to be formatted as well. Refer to
Chapter 5 and complete these tasks.
■
The copying speed is somewhat slower compared with an ordinary IDE
(UltraATA) connection
●
Due to the IEEE1394 and product specifications, it is normal that the
data transfer speed via IEEE1394 is lower than that via IDE.
Appendix C
Specifications
Standards Conformance : IEEE1394-1995, IEEE1394a (Version 2.9)
Connectors : IEEE1394 Connector x 2
Supported HDDs : 2.5"/3.5" HDD
Cooling Fan : 1
LED : "PCi" logo illuminates when the adapter
is powered
Power Input : External AC Adapter (DC 12V)
Dimensions : 125 (W) x 240 (D) x 40 (H) mm
Operating Temperature : 0 -40 degrees Celsius
Humidity : 35% - 85% non-condensing
(4.9 x 9.4 x 1.5 in)