Planex MZK-W04N-XX User Manual Download Page 47

Page: 47 / 99

MZK-W04N-XX

Cancel

If there is anything wrong with the settings you made, you can

click

Cancel

to configure the page again.

5.7. DNS

If you choose

Dynamic IP

PPPoE

as WAN settings, and there

s at least one DNS will be assigned automatically. If you have other

preferred DNS server, or your ISP do not give you an IP address of DNS

server, you can configure the DNS settings on this page.

DNS address

Enter the DNS address provided by your ISP.

Secondary DNS Address (optional)

Enter another DNS address

provided by your ISP, however, this is option and you may leave it

blank.

Apply

Click this button to save the settings and restart the router.

Cancel

If there is anything wrong with the settings you made, you can

click

Cancel

to configure the page again.

Summary of Contents for MZK-W04N-XX




































































































Search results

Summary of Contents for MZK-W04N-XX

Reviews:

Brands by name

Popular brands

Planex MZK-W04N-XX, User Manual

Search results

Summary of Contents for MZK-W04N-XX

Reviews:

Brands by name

Popular brands