Planex MZK-W04N-XX, User Manual

Page: 20 / 99

2
11
Chapter2 Setup & Configuration
Setup & Configuration
1.Client
Ņ
s Computer Setup
The computers on your LAN need to be set up to cooperate with MZK-
W04N-XX Wireless Router.
Please make sure that your operating system already enabled your interface
card on the host and connected to one of the LAN ports on MZK-W04N-XX
through Cat.5 cable. Be sure that LEDs on MZK-W04N-XX are already
on and the LED corresponds with the port which you connected. If you
switch on MZK-W04N-XX for the first time, owing to the default status, it
will automatically enable the embedded DHCP server and start to distribute
IP to your host. In addition, the default IP address of MZK-W04N-XX is
ņ
192.168.1.1 .
Ň
If your operating system is Windows 98/2000/XP, you
may be able to use command of
ņ
ipconfig
Ň
to inquire whether you have
the correct IP address or not. If you are using Linux/Unix-Like system, you
can use
ņ
ifconfig
Ň
to check your NIC (Network Interface Card) address.
The instructions are as follows:
œ
Windows98
1.Click
ņ
Start
Ɩ
Programs
Ɩ
MS-DOS
Ň
or
ņ
Start
Ɩ
Run
ČŇ
and
type in
ņ
command.exe
Ň
and then press enter.
2.
ņ
MS-DOS
Ň
window will appear.
3.Type
ņ
ipconfig
Ň
after the command of
ņ
c:>
Ň
and then press enter.
4.MS-DOS will appear your NIC address in the window, please take notice
of the value of
ņ
IP Address
Ň
and
ņ
Default Gateway .
Ň
5.The value of
ņ
Default Gateway
Ň
is the IP address of MZK-W04N-XX.