Planex Mini-101U User Manual Download Page 34

Page: 34 / 97

Mini-101U

22.If you want to update firmware, please go to Planex Communication

Inc. website: http://www.planex.net to find the suitable version of

firmware, and download it to your computer. After that, click

icon

to browse the files and find the latest firmware file you've downloaded.

After finding the firmware file, please click

Upgrade

to start

firmware upgrading. During upgrading, please

DO NOT

cut off the

power to avoid failing of upgrading. When upgrading complete, you

may click

to go back to the main page.

1.If upgrading the wrong firmware or upgrading failure might

both damage Mini-101U. And these kinds of problems will be

considered as operation error and we must charge a service fee.

2.Please

DO NOT

cut off the power by haphazard, or the

firmware upgrade might be failed and cause the system disorder.

Please

DO NOT

cut off the power or close the upgrading

program until the system notify that the system upgrading

successful.

Summary of Contents for Mini-101U


































































































Search results

Summary of Contents for Mini-101U

Reviews:

Related manuals for Mini-101U

Brands by name

Popular brands

Planex Mini-101U, User Manual

Search results

Summary of Contents for Mini-101U

Reviews:

Related manuals for Mini-101U

Brands by name

Popular brands