Preferred SSID
Type in the SSID name of the device you want to connect.
BSS Type
You can select
Peer-to-Peer
,
Access Point
or
Auto Mode
of the device you to
connect.
Tx Rate
You can select the data rate or set to auto mode from the pull-down menu.
Channel
Select the channel depends on your country.
Power Mode
No Power Save
：
Select this function, the adapter will be in full active mode.
Max Power Save
：
Select this function, the power save mode will be enabled.
4x Config
4X Enable: Click this box to enable the
TI-Based
4x function.
Packet Burst Enable: Click this box to enable the Packet Burst function.
Mode
You can select
IEEE 802.11b(B-Only)
,
802.11b +(B-Plus)
,
802.11g
(
G-Only
)standard or
B&G
Mode (If you choose this option the device will
automatically convert the suitable standard ).
Profile
Enter the profile name and click the
Save
button to save your configuration, To
open the profiles you saved, select the profile from the pull-down menu and then
click the
Load
button. To delete the profiles you saved, select the profile from the
pull-down menu and then click the
Delete
button.
Tx Power Level
Transmit power level, includes
Low Power
,
Medium-Low Power
,
Medium
Power
,
Medium-High Power
,
High Power
Fragment
Threshold
To fragment MSDU or MMPDU into small sizes of frames for increasing the
reliability of frame (The maximum value of 4096 means no fragmentation is
needed) transmission. The performance will be decreased as well, thus a noisy
environment is recommended.
RTS Threshold
This value should remain at its default setting of
2432
. Should you encounter
inconsistent data flow, only minor modifications of this value are recommended.
Preamble
A preamble is a signal used in wireless environment to synchronize the
transmitting timing including Synchronization and Start frame delimiter. (
Note
: If
you want to change the Preamble type into
Long
or
Short
, please check the
setting of AP.)
Retry limits
You can set the number of retries if no acknowledgement appears from
the receiving station.
20