manualshive.com logo in svg

Planex FMX-24NZ, User Manual, Page: 98 / 118

Share
Download
Planex FMX-24NZ User Manual Download Page 98

- 98 - 

4.3.3. GVRP   

GVRP (GARP [Generic Attribute Registration Protocol] VLAN Registration Protocol)   
GVRP allows automatic VLAN configuration between the switch and nodes.   
For example, if the switch is connected to a device with GVRP enabled, you can enable this setting to 
allow dynamic VLAN configuration information to be processed by the switch. 
If a device sends a GVRP request using the VID of a VLAN defined on the switch, the switch will 
automatically add that device to the existing VLAN. 
 
This page you can enable / disable the GVRP (GARP VLAN Registration Protocol) support.   

 

Actions->

 

1.

 

Select 

<Edit>

.  

2.

 

Press 

Space 

key to choose Enabled / Disabled.   

3.

 

Press 

Ctrl+A 

back to action menu line. 

4.

 

Select 

<Save> 

to save configure value.   

 

Note: 

GVRP must also be enabled on participating network nodes. 

 

Summary of Contents for FMX-24NZ























































































































Reviews:

No comments