Planex FMX-24NZ User Manual Download Page 63

Page: 63 / 118

- 63 -

Create 802.1Q VLAN

Create an 802.1Q VLAN and add tagged /untagged member ports to it.

Select

<Edit>

VLAN Name:

Type a name for the new VLAN.

VLAN ID:

Type a VID (between 1~4094). The default is 1. There are 256 VLAN groups to

provided configure.

Protocol VLAN:

Press

Space

key to choose protocols type.

Member:

Press

Space

key to choose VLAN member. There are three types to selected:

UnTagged

：

This port is the member port of this VLAN group and outgoing frames are NO

VLAN-Tagged frames.

Tagged

：

This port is the member port of this VLAN group and outgoing frames are

VLAN-Tagged frames.

：

The port is NOT member of this VLAN group.

Press

Ctrl+A

go back action menu line.

Select

<Save>

to save all configure value.

NOTE:

If the trunk groups exist, you can see it (ex: TRK1, TRK2…) after port 26, and you can

configure it is the member of the VLAN or not.

Summary of Contents for FMX-24NZ























































































































Search results

Summary of Contents for FMX-24NZ

Reviews:

Planex FMX-24NZ, User Manual, Page: 63 / 118

Search results

Summary of Contents for FMX-24NZ

Reviews: