Planex BLW-HPMM-U, User Manual

Page: 76 / 113

3
68
BLW-HPMM-U
œ
Name
Ĉ
Enter the name of the application which you want configure.
œ
Incoming Type
Ĉ
Scroll down the list to choose the incoming
application type: TCP or UDP type.
œ
Incoming Port Range
Ĉ
Enter a port or a range of port to be the
incoming port. Once the trigger port is detected, the incoming packets
are allowed to pass the firewall to the specified incoming ports.
œ
Trigger Type
Ĉ
Scroll down the list to choose the trigger type: TCP or
UDP type.
œ
Trigger Start Port
Ĉ
Enter the starting port number as the starting
outbound port for the special application.
œ
Trigger Finish Port
Ĉ
Enter the finish port number as the ending
outbound port for the special application.
œ
Enable
Ĉ
Click the check box to enable the settings.
œ
Apply and Reboot
Ĉ
Click this button to save the setting and restart the
router.
œ
Reset
Ĉ
If there is anything wrong with the settings, you can click
ņ
Reset
Ň
to configure the page again.
1.11 Ping Toolkit
This function can help you send
ņ
Ping
Ň
packets to detect if the remote
host is O.K. The response messages will appear below and they can also
help to diagnose the network problems.