Planex BLW-HPMM-U, User Manual

Page: 71 / 113

63
3
Chapter 3 Advanced Setup & Configuration
1.7 Rate Policing QoS
Please configure the Rate Policing QoS according to the real environment.
You can separately configure the LAN and the WAN sides. The LAN side
or the WAN side both can only have 7 policies.
If you want to use or modify the policy, you have to click the Enable check
box first.
œ
Hardware Rate Policing QoS
Ĉ
Click this check box to enable the Rate
Policing QoS.
œ
Priority
Ĉ
The highest priority is 0, and the least is 7.
œ
src/dst
Ĉ
You can set the src (source) or dst (destination) IP to be the
configured.
œ
Address/IP Mask
Ĉ
Enter the source or destination IP address and its
subnet mask.
œ
Protocol
Ĉ
Choose the protocols (TCP, UDP or IP) which used by
remote systems or services.
œ
Start Port
Ĉ
Enter the starting port of the QoS port range. If the QoS
only uses on a single port, please enter the same port number on the Start
and End ports.
œ
End Port
Ĉ
Enter the end port of the QoS port range. If the QoS only
uses on a single port, please enter the same port number on the Start and
End ports.