14. Record Message.
To record your outgoing message, (while in
“programming status”),
press:
rec +
# and record your message for a
maximum of 10 seconds.
Rec
=>
#
=>
Speak your message
into the keypad
15. Play Back.
To play back recorded message, enter the sequence code below and in place of the “pick up the phone receiver”,
pick up the phone receiver to hear the message.
Rec
=>
*
=> pick up the phone receiver to listen
Listen to your message
through phone receiver
16. Remote Access to Keypad/Dialer.
You may change your dialer function settings (arm, disarm, monitor) remotely by phone.
The number of times the phone rings before you are connected with the Dialer System can be preset by entering the
number sequence below into your keypad. In place of the {00 to 12} enter the number of rings from one (01) to 12
(12). Entering (00) turns off the remote access function.
The default factory setting is “08”.
5
=>
3
=>
*
=>
{00
to
12}
=>
#
Phone ring setting:
two digit number
from 01 to 12
