47
Note:
You need to give your LAN PC clients a
fixed/static IP address for the Access Control rule to
work properly.
Client PC Service
You can block the clients from accessing some Internet
services by checking the services you want to block.
Protocol
This allows you to select UDP, TCP or both protocol
types you want to block.
Port Range
You can assign up to five port ranges. The router will
block clients from accessing Internet services that use
these ports.
Apply Changes
Click
“
Apply Changes
”
to save the setting.
Reset
Click
“
Reset
”
to clear all fields.
Click <
Save>
at the bottom of the screen to save the above configurations and press
“
Apply and
Reboot
”
to apply the configuration and reboot the XRT-D router. You can now configure other
advance sections or start using the router (with the advance settings in place).
3.5.2 URL Blocking
You can block access to some Web sites from particular PCs by entering a full URL address or
just keyword of the Web site.
Parameters
Description
Enable URL Blocking
Enable/disable URL Blocking.
Add URL / Keyword
Fill in
“
URL/Keyword
”
and then click
“
Add
”
. You can
enter the full URL address or the keyword of the web site
you want to block. If you find any typo before adding it