transmissions warrant special consideration.
The Switch allows you to further tailor how priority tagged data packets are handled on your network.
Using queues to manage priority tagged data allows you to specify its relative priority to suit the needs of
your network. There may be circumstances where it would be advantageous to group two or more
differently tagged packets into the same queue. Generally, however, it is recommended that the highest
priority queue, Queue 1, be reserved for data packets with a priority value of 7. Packets that have not
A weighted round robin system is employed on the Switch to determine the rate at which the queues are
emptied of packets. The ratio used for clearing the queues is 4:1. This means that the highest priority
Remember, the priority queue settings on the Switch are for all ports, and all devices connected to the
Switch will be affected. This priority queuing system will be especially beneficial if your network employs
ability of assigning priority tags.
VLAN Description
A Virtual Local Area Network (VLAN) is a network topology configured according to a logical scheme
rather than the physical layout. VLAN can be used to combine any collection of LAN segments into an
autonomous user group that appears as a single LAN. VLAN also logically segment the network into
different broadcast domains so that packets are forwarded only between ports within the VLAN. Typically,
VLAN can enhance performance by conserving bandwidth, and improve security by limiting traffic to
A VLAN is a collection of end nodes grouped by logic instead of physical location. End nodes that
frequently communicate with each other are assigned to the same VLAN, regardless of where they are
physically on the network. Logically, a VLAN can be equated to a broadcast domain, because broadcast
packets are forwarded to only members of the VLAN on which the broadcast was initiated.
been given any priority value are placed in Queue 0 and thus given the lowest priority for delivery.
queue, Queue 1, will clear 4 packets for every 1 packet cleared from Queue 0.
switches with the cap
a VLAN corresponds to a particular subnet, although not necessarily.
specific domains.
NOTICE:
1.
No matter what basis is used to uniquely identify end nodes and assign these nodes VLAN
membership, packets cannot cross VLAN without a network device performing a routing function
between the VLAN.
2.
The Switch supports Port-based VLAN and IEEE 802.1Q VLAN. The port untagging function can
be used to remove the 802.1 tag from packet headers to maintain compatibility with devices that
are tag-unaware.
3.
The Switch's default is to assign all ports to a single 802.1Q VLAN named DEFAULT_VLAN. As
new VLAN is created, the member ports assigned to the new VLAN will be removed from the
