34
Wireless Client Configuration
This section applies to all Wireless clients wishing to use the WRT-413's Access Point, regardless of the operat-
ing system which is used on the client.
To use the Wireless Access Point in the WRT-413, each Wireless Client must have compatible settings, as
follows:
Mode
The mode must be set to
Infrastructure
.
SSID (ESSID)
This must match the value used on the WRT-413. The default value is
default
Note! The SSID is case sensitive.
WEP
By default, WEP on the WRT-413 is
disabled
.
•
If WEP remains disabled on the WRT-413, all clients must have
WEP disabled.
•
If WEP is enabled on the WRT-413, each client must use the same
settings as the WRT-413.
Note:
By default, the WRT-413 will allow both 802.11b and 802.11g connections.
Summary of Contents for WRT-413
Page 1: ...i 802 11g Wireless Broadband Router WRT 413 User s Manual...
Page 6: ......
Page 33: ...27 Figure 19 Windows NT4 0 DNS...
