9
Configuration Program
The WRT-413 contains an HTTP server. This enables you to connect to it, and configure it, using your Web
Browser that has support
JavaScript
.
The configuration program has been tested on the following browsers:
•
Netscape V4.08 or later
•
Internet Explorer V4 or later
Preparation
Before attempting to configure the WRT-413, please ensure that:
•
Your PC can establish a physical connection to the WRT-413. The PC and the WRT-413 must be directly
connected (using the LAN port on the WRT-413) or on the same LAN segment.
•
The WRT-413 must be installed and powered ON.
•
If the WRT-413's default IP address (192.168.0.1) is already used by another device, the other device must
be turned OFF until the WRT-413 is allocated a new IP Address during configuration.
Using UPnP
If your Windows system supports UPnP, an icon for the WRT-413 will appear in the system tray, notifying you
that a new network device has been found, and offering to create a new desktop shortcut to the newly-discovered
device.
•
Unless you intend to change the IP Address of the WRT-413, you can accept the desktop shortcut.
•
Whether you accept the desktop shortcut or not, you can always find UPnP devices in
My
Network Places
(previously called
Network
Neighborhood
).
•
Double - click the icon for the WRT-413 (either on the Desktop, or in
My Network Places
) to start the
configuration. Refer to the following section
Setup Wizard
for details of the initial configuration process.
Using your Web Browser
To establish a connection from your PC to the WRT-413:
1. After installing the WRT-413 in your LAN.
2. Set your PC as a DHCP client and start. If your PC is already running, restart it.
3. Start your WEB browser.
4. In the
Address
field, enter "HTTP://" and the IP Address of the WRT-413, as in this example, which uses the
WRT-413's default IP Address:
HTTP://192.168.0.1
The default password is blank, so your will not be prompted for a password. However, you should assign a
password to your WRT-413. Please refer to the
Password
section later in this chapter for details.
Summary of Contents for WRT-413
Page 1: ...i 802 11g Wireless Broadband Router WRT 413 User s Manual...
Page 6: ......
Page 33: ...27 Figure 19 Windows NT4 0 DNS...
