User’s Manual of WNRT-633
-76-
5.8 Route Setup
Static routing is a special type of routing that can be applied in a network to reduce the problem of
routing selection and data flow overload caused by routing selection so as to improve the packets
forwarding speed. You can set the destination IP address, subnet mask, and gateway to specify a
routing rule. The destination IP address and subnet mask determine a destination network or host to
which the router sends packets through the gateway.
5.8.1 Router Setup
A static route is a pre-determined pathway that network information must travel to reach a specific host
or network.
Figure 5-8-1
Routing Setup
The page includes the following fields:
Object
Description
Enable Static Route
Click this box to enable static route.
IP Address
The network or host IP address desired to access.
