Hardware Installation
1.
Locate an optimum location for the WNRT-630.
The best place
for your WNRT-630 is usually at the center of your wireless network,
with line of sight to all of your mobile stations.
2.
Adjust the antennas of WNRT-630.
Try to adjust them to a posi-
tion that can best cover your wireless network. The antenna’s posi-
tion will enhance the receiving sensitivity.
3.
Connect RJ-45 cable to WNRT-630 LAN port.
Connect one of the
LAN ports on WNRT-630 to your LAN switch/hub or a computer with
a RJ-45 cable.
4.
Connect RJ-45 cable to WNRT-630 WAN port.
Connect the
supplied Ethernet cable to xDSL/Cable Modem and the WAN port on
WNRT-630.
5.
Plug in power adapter and connect to power source.
After
power on, WNRT-630 will start to operate.
Note
ONLY use the 12V 1A power adapter supplied with the
WNRT-630. Otherwise, the product may be damaged.
If you want to reset WNRT-630 to default settings, press
and hold the
RESET
button over 20 seconds and release.
And then wait for WNRT-630 restart.
