background image

300Mbps 802.11n Wireless USB Adapte

 WNL-U556M  

Copyright 

Copyright  

 2012 by PLANET Technology Corp. All rights reserved. No part of this publication may 

be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language 
or computer language, in any form or by any means, electronic, mechanical, magnetic, optical, 
chemical, manual or otherwise, without the prior written permission of PLANET. 
PLANET makes no representations or warranties, either expressed or implied, with respect to the 
contents hereof and specifically disclaims any warranties, merchantability or fitness for any particular 
purpose. Any software described in this manual is sold or licensed "as is". Should the programs prove 
defective following their purchase, the buyer (and not PLANET, its distributor, or its dealer) assumes 
the entire cost of all necessary servicing, repair, and any incidental or consequential damages 
resulting from any defect in the software. Further, PLANET reserves the right to revise this publication 
and to make changes from time to time in the contents hereof without obligation to notify any person of 
such revision or changes. 
 

All brand and product names mentioned in this manual are trademarks and/or registered trademarks 
of their respective holders. 

 

Federal Communication Commission Interference Statement   

This equipment has been tested and found to comply with the limits for a Class B digital device, 
pursuant to Part 15 of FCC Rules. These limits are designed to provide reasonable protection against 
harmful interference in a residential installation. This equipment generates, uses, and can radiate radio 
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful 
interference to radio communications. However, there is no guarantee that interference will not occur 
in a particular installation. If this equipment does cause harmful interference to radio or television 
reception, which can be determined by turning the equipment off and on, the user is encouraged to try 
to correct the interference by one or more of the following measures:     

1.  Reorient or relocate the receiving antenna. 
2.  Increase the separation between the equipment and receiver. 
3.  Connect the equipment into an outlet on a circuit different from that to which the receiver is 

connected. 

4.  Consult the dealer or an experienced radio technician for help. 

 

FCC Caution   

To assure continued compliance. (Example - use only shielded interface cables when connecting to 
computer or peripheral devices). Any changes or modifications not expressly approved by the party 
responsible for compliance could void the user’s authority to operate the equipment. 
This device complies with Part 15 of the FCC Rules. Operation is subject to the Following two 
conditions: (1) This device may not cause harmful interference, and (2) this Device must accept any 
interference received, including interference that may cause undesired operation.   
 

Federal Communication Commission (FCC) Radiation Exposure 
Statement 

This equipment complies with FCC radiation exposure set forth for an uncontrolled environment. In 
order to avoid the possibility of exceeding the FCC radio frequency exposure limits, human proximity 
to the antenna shall not be less than 20 cm (8 inches) during normal operation. 

Summary of Contents for WNL-U55M




































































Reviews: