wireless port and LAN is on wired port when device is set to system
Router mode
.
Bridge mode and AP + Bridge mode are similar to AP mode when device is set to
Router mode; WAN is on wired port and LAN is on wireless port. Thus users must also
connect. WNAP-6300 with another wireless device before it is set to Router mode and
access WNAP-6300 via the connected wireless device.
3.5 RADIUS Settings
RADIUS (Remote Authentication Dial-In User Service) is a server for remote user authentication and
accounting; playing a central role in the network in providing the capabilities of authenticating,
authorizing, accounting, auditing, alarming and etc. It allows an organization to maintain user profiles
in a central database that all remote servers can share.
Open “
RADIUS Settings
” in “
System
” to make RADIUS configuration.
Figure 17 RADIUS Settings
Authentication RADIUS Server
This is for RADIUS authentication. It can communicate with RADIUS through IP Address, Port and
Shared Secret.
IP Address
: Enter the IP address of the Radius Server;
Port
: Enter the port number of the Radius Server;
Chapter 3 Basic Settings Page 20
