background image

 

3.5 Advance 

This option enables you to configure more advanced settings, for example: wireless mode, protection 

mode and etc. 

 

 

 

 

Parameter Description 

Wireless Mode 

802.11 B/G mix

 – If you have a mix of 802.11b and 802.11g 

wireless stations in your network, it is recommended to setting the 

card to this mode. This mode is also the default setting. 

 

802.11 B only

 – This card can be compatible with both 802.11g 

and 802.11b wireless stations. If there are only 802.11b wireless 

stations in the network, you can set the card to this mode. 

 

802.11 G only

 – This card can be compatible with both 802.11g 

and 802.11b wireless stations. If there are only 802.11g wireless 

stations in the network, you can set the card to this mode. 

 

 

Select Your Country Region Code  The available channel differs from different countries. For 

example: USA (FCC) is channel 1-11, Europe (ETSI) is channel 

1-13. The operating frequency channel will be restricted to the 

country user located before importing. If you are in different 

country, you have to adjust the channel setting to comply the 

regulation of the country. 

19

 

Summary of Contents for WL-3565

































Reviews: