- 6 -
100Base-FX
WGSW-D1ST
TX
RX
100Base-FX SC multi-mode fiber module
100Base-FX
WGSW-D1S15
TX
RX
100Base-FX SC multi-mode fiber module
The auto-negotiation feature of the switch allows each port of the device running at one of
the following operation modes:
Port
Media
Speed
Duplex Mode
Full Duplex
100Mbps fiber optic (Alternative to
copper port-1)
100Mbps
Half Duplex
Full Duplex
10Mbps
Half Duplex
Full Duplex
10/100Mbps
10/100Mbps RJ-45 (copper)
100Mbps
Half Duplex
All copper ports supports MDI/MDI-X automatically crossover capability that is the port
can connect either the PC or hub without crossover cable adjustment.
Wiring for 10/100Mbps (Fiber Optic/Copper)
Following are the summaries of cabling required:
Media
Speed
Wiring
Maximum Distance
10Mbps
Category 3,4,5 UTP/STP
100m
10/100Mbps RJ-45
ports
100Mbps Category 5 UTP/STP
100m
WGSW-D1SC,
WGSW-D1ST
100Mbps 62.5/125 or 50/125
µ
m
multi-mode fiber optic
2km
WGSW-D1S15
100Mbps 9/125
µ
m single-mode fiber optic 15km
If the port is connected but the relevant LED is dark, check the following items:
1.
The switch and the connected device
’
s power are on or not.
2.
The connecting cable is good and with correct type.
3.
The cable is firmly seated in its connectors in the switch and in the associated
device.