Planet WGSD-1020, User Manual, Page: 58 / 93

- 54 -
Figure 5-10 WGSD-1020 Switch Advanced Settings Web Page screen
5.4.2.2 Advanced:
Enter the settings, then click Submit to apply the changes on this page.
MAC Table Address Entry Age-Out Time: type the number of seconds that an inactive MAC ad-
dress remains in the Switch
’
s address table. The valid range is 300-765 seconds. The default value
is 300 sec.
Max bridge transmit delay bound control: limit the packets queuing time in switch, if enable this
function, the packets queued exceed will be drop. The valid value is 1 sec., 2 sec. and 4 sec. and off.
Default value is 2 sec.
Broadcast Strom Filter mode: provide 5%, 10%, 15%, 20%, 25% and off for broadcast storm
control activity.
Priority Queue Service:
First Come First Served: the sequence of packets sent is depend on arrive order.
All High before Low: the high priority packets sent before the low priority packets.
WRR (Weighted Round Robin): select the preference given to packets in the Switch
’
s high-priority
queue. These options represent the number of high priority packets sent before one low priority
packet. For example: High weight: 5 and Low weight 2. It means WGSD-1020 sends 5 high priority
packets before sending 2 low priority packets.
Enable Delay Bound: limit the low priority packets queuing time in WGSD-1020. Default maximum
delay time is 255 ms. If the low priority packet stays in Switch exceed Max delay time, it will be sent.
The valid range is 1-255 ms.
QoS Policy: High Priority Levels: provide 0-7 priority levels can map to high or low queue.
Protocol Enable Setting
Enable STP Protocol: provide disable or enable STP protocol. Default mode is enabling.
Enable IGMP Protocol: provide disable or enable IGMP protocol. Default mode is enable.
VLAN Operation Mode: IEEE 802.1Q(Port-based) with GVRP VLAN mode.
IEEE 802.Q( Port-based) without GVRP VLAN mode.