1. Package Contents
2. Physical Introduction
– 1 –
– 2 –
– 3 –
– 4 –
3. Hardware Installation
Front Panel of WDRT-1202AC
Set your computer to get an IP address from the Wireless Router:
2011-E50340-000
Step 1:
Locate the WDRT-1202AC in an optimum place, and adjust the
antenna for the best coverage.
WDRT-1202AC
Quick Guide
Note
If there is any item missing or damaged, please contact the
seller immediately.
Thank you for choosing PLANET WDRT-1202AC. Before installing the
router, please verify the contents inside the package box.
WDRT-1202AC
Quick Installation Guide
1200Mbps 802.11ac Dual Band
Wireless Gigabit Router
– 5 –
– 6 –
– 7 –
– 8 –
Step 3:
Follow the wizard to configure WAN, Wi-Fi and router
password.
Step 4:
You can see the Web management UI of the WDRT-1202AC
after configuring this device.
4. Network Configuration (Windows 7)
5. Enter into the Web Management
1. Click the
“Start”
button located at the lower-left corner of your
computer.
2. Click
“Control Panel”
.
3. Double-click the
“Network and Sharing Center”
icon.
4. Click
“Change Adapter Settings”
.
5. Double-click
“Local Area Connection”
.
6. Select
“Internet Protocol Version 4 (TCP/IPv4)”
and click
“Properties”
.
7. Select
“Obtain an IP Address automatically”
and
“Obtain DNS
Server Address automatically”
, and then click the
“OK”
button
twice to save the configuration.
Further Information:
The above steps introduce the simple installations and configurations of
the WDRT-1202AC. For further configurations of LAN, Wireless, Access
Control, etc, please refer to the user manual, which can be downloaded
from the website.
http://www.planet.com.tw/en/support/download.php?type1=4&model
=49025&type=3
If you have further questions, please contact the local dealer or
distributor where you purchased this product.
Power Adapter
Ethernet Cable
Step 2:
Connect the Power Adapter provided in the package to the
WDRT-1202AC. The Power LED on the front panel will turn on
accordingly.
USB
5GHz
Power
Internet
2.4GHz
Rear Panel of WDRT-1202AC
ON/OFF
WPS
(press >5 seconds)
WLAN ON/OFF
(press 1~5 seconds)
Power
Reset (press 10 seconds)
USB
LAN1~4 WAN
Power
Adapter
Power
Step 3:
Follow the figure below to connect the network devices. It
depends on your network environment to connect the WAN
port to a Cable/xDSL modem, or the Ethernet directly in your
place.
Step 1:
The Web management allows you to access and manage the
Wireless Router easily. Launch the Web browser and enter the
default IP address
http://192.168.1.1
Step 2:
When the login window pops up, please enter the User Name
and Password. The default User Name and Password are both
“admin”
. Then click the
“Log In”
button to continue.
Default IP Address:
192.168.1.1
Default User Name:
admin
Default Password:
admin
Default SSID:
PLANET_2.4G_XXXX
PLANET_5G_XXXX
(“X” means the last 4 digits of the MAC address.)
Phone
Jack
RJ11
PC
Cable/xDSL Modem
LAN Ports
WAN Port
RJ45
RJ45
Power
Adapter
Power
