22
have multiple WAP-1960s bridging multiple LANs wirelessly. Only central
WAP-1960 is in Point to Multipoint mode. For all other bridged WAP-1960,
configure them in Point to Point mode and enter the Remote MAC Address
of central WAP-1960 set to Point to Multipoint. All the WAP-1960s must
be configured on the same channel.
Note:
When WAP-1960 works in AP mode, it can have maximum 63 clients. For
best performance, we suggest the maximum client number is 25.
When WAP-1960 works in to Point-To-MultiPoint mode, you can have 5
remote sites to connect to this WAP-1960.
The Transmission Antenna is ANT A, only use this side’s Reversed Polarity
SMA Male connecter to connect external antenna.
Caution:
The Transmission Antenna is ANT A, only use this side’s Reversed
Polarity SMA Male connecter to connect external antenna.
Setup->Wireless LAN -> Authorized Mac Address
For security purposes, the Access Point can discriminate its associations with other
wireless stations. The
Authorized MAC Address
lets you select which stations are
allowed throughput on the wireless interface. First you must enable the MAC
address authorization table by placing a checkmark in the
Authorized Table
Enable
. When you want to leave, please click
Close
to use the table. The table is
maintained manually and can be updated and edited by downloading MAC
addresses to the data table.
