Planet VIP-361PE, User Manual

Page: 28 / 62

Item
Descriptions
PC Port
Connection Type
Choose the PC port connection type from disable, NAT and Bridge.
NAT
- The product will be same as a router.
Bridge
- The LAN port is same as the WAN port
Disable
- PC port switch to NAT mode, but Internet port and PC port
can’t communication to each other.(The device behind the PC port still
can connect to each other)
Local IP Address
Set the IP address of PC port.
Efficient when user choose NAT.
Subnet Mask
Set the subnet mask of PC port.
Efficient when user choose NAT.
Network Address Server Settings (DHCP)
Support Three mode disables, NAT, Bridge mode,
DHCP Server
- It will assign the IP Addressed set here to devices that connect to the LAN port.
Number of Address
- You may limit the number of addresses your router hands out.
Item
Descriptions
Local DHCP
Server
Enable / Disable DHCP Server.
If PC port is not in NAT mode, user can not enable DHCP server.
Start IP Address
The starting IP address which IP phone will attribute to clients.
Note: The Network Sect of DHCP Server Start Address should be the
same with the one that VIP-361PE’s PC port.
Generally speaking, you can use the default setting.
Number of
Address
Number of IP address will distribute to clients.
Client Lease Time
The interval of DHCP will send request to continue in period of validity.
Unit is hour.
Primary DNS
Primary DNS that DHCP Server will distribute.
You can use the default setting.
28