11
Reversing the orientation may damage the handset.
The battery needs to be replaced if it does not recover
its full storage capacity after recharging.
When replacing batteries, always use good quality Ni-MH
re-chargeable AAA size batteries.
Never use other batteries or conventional alkaline
batteries.
DCT-100 installation
The three rechargeable Ni-MH batteries (AAA size) come with your phone. Install the batteries before
using your phone.
1. Slide the battery cover in the direction of the arrow and pull it out.
2. Remove old batteries, if any, and insert new batteries as indicated, matching correct polarity (+, -).
3. Replace the battery cover, slide the cover up until it snaps shut.
This phone won't work by itself. It should be registered
to the main base unit inside the VIP-320.
Before initial using, it should be charged for 24 hours.
Í
Note
Í
Note
Register your DCT-100 to VIP-320
• Press
Intercom
button on VIP-320 for 5 seconds until the Paring LED lights.
• Press key to go into manual option.
• Select
HS register
• Press
INT
key.
Summary of Contents for VIP-320
Page 1: ...H 323 SIP DECT VoIP router VIP 320 User s manual 1...
Page 16: ...16...
Page 18: ...VIP 320 main page 18...