High Definition Color PoE IP Phone with Dual Display
VIP-2140PT
54
5.15 Call Forward
Call forward is also known as ‘Call Divert’ which is to divert the incoming call to a specific number based on
the conditions and configurations. User can configure the call forward settings of each line.
There are three types:
Unconditional Call Forward --
Forward any incoming call to the configured number.
Call Forward on Busy --
When user is busy, the incoming call will be forwarded to the configured
number.
Call Forward on No Answer --
When user does not answer the incoming call after the configured delay
time, the incoming call will be forwarded to the configured number.
To configure call forward, when the device is in the default standby mode,
Press soft-button [Menu] till you find the [Features] item.
Enter [Features] item till you find the [Call Forward] item.
Press the [Call Forward] button to open call forward configuration screen and select the line to be
configured with up/down navigation keys.
Press the [Enter] button to edit the call forward settings.
Select the call forward type with the up/down navigation keys. Click the [Enter] button to configure the
call forward number and delay, if applicable.
Enable or Disable call forward with the left/right navigation buttons against specific lines and types.
If select ‘Enable’, browse the setting parameters with the up/down navigation keys and enter required
information. When done, press the [Save] / [OK] button to save the changes.
Figure 61 - Select Line for Call Forward Configuration
