VIP User
’
s Manual
Command Line Interface
42
HTTP server = enabled
Telnet server = enabled
******************************************************
ITG>
net show hwstat
The
net show
hwstat
command displays the hardware configuration of VIP.
Syntax Description
This command has no arguments or keywords
Example
The following example shows how to display hardware configuration:
ITG>net show hwstat <Enter>
****************** Hardware Configuration ******************
Flash: type-MX29L1611 32 sectors 64 KB/sector
RAM: 8 MB 512K x 16
LAN: 100 Mbps half duplex. Link UP
TIM slot A: type-FXO2S2 DSP-C5409 codec-PEB2466 Diag-OK
************************************************************
ITG>
net set pppoe
The
net set pppoe
command configures PPPoE related parameters while VIP is deployed in
PPPoE environment.
Syntax Description
on
Turn on PPPoE client
off
Turn off PPPoE client
username
PPPoE connection username provided by ISP
password
PPPoE connection password provided by ISP
fix_ip
Fixed IP address provided by ISP
net set dhcp
net set dhcp
command configures VIP to be DHCP client in order to obtain TCP/IP related pa-
rameters from ISP while VIP is deployed in DHCP environment.
Syntax Description
Summary of Contents for VIP-050
Page 1: ...Internet Telephony Gateway VIP 050 VIP 450 User s Manual Rev 2 0...
Page 18: ......
Page 76: ......
