manualshive.com logo in svg

Planet VIP-050, User Manual

Share
Download
Planet VIP-050 User Manual Download Page 3

SIP Voice Gateway User

’

s Manual 

Preface 

 

 

iii

How to Use This Manual

 

 

This manual was designed for the technical and non-technical users of PLANET Internet telephony 
gateway VIP-050 / VIP-450.  It contains information about the functions of VIP and instructions for 
its installation, basic configuration and operation in related chapters, and introduces more advanced 
command line interface, firmware upgrade and appendix information.  Read this section carefully for 
important information about the manual

’

s organization. 

 

Chapter 1: Overview 

This chapter provides conceptual overview and description of VIP, explanation of how VIP interacts 
with each for enabling VoIP services, and an overview of the required tasks 

Chapter 2: Installing VIP 

This chapter describes required steps to properly and safely install and configure VIP on your net-
work 

Chapter 3: VIP Concepts 

This  chapter  gives  information  about  VIP  technology  and  describes  basic  concepts  using  VIP  for 
providing telephony services over IP network 

Chapter 4: Configuring VIP from Web Browser 

This chapter explains procedures for configuring VIP from a web browser 

Chapter 5: Making a Call with VIP 

This chapter explains how to make Internet calls from telephony devices connected to VIP directly 
or indirectly. 

Chapter 6: Command Line Interface 

This chapter describes how to access the command line interface. It also contains information about 
the commands used to configure VIP.

 

Chapter 7: Upgrading VIP 

This chapter explains how to download new revision software and upgrade VIP. 

Appendix A: Technical Specifications 

This appendix lists VIP specifications and the assignment of pins of all the interface ports. 

Appendix B: CLI Commands 

This appendix provides a short description of each CLI command with a reference to the pages that 
contain detailed information on the command. 

Appendix C: Factory Default Settings 

This appendix lists factory settings of VIP. 

 

Summary of Contents for VIP-050




















































































Reviews:

No comments

Brands by name

Popular brands

Load more brands