User’s Manual of VCG-1500WG-LTE
40
Click “Apply”to save.
5.3 Router Configuration
Setup system static router setting and display system router information. System default router is to send all data to public
internet. If user wants to visit an appointed network, please add router by hand.
Figure 5-3-1
Route
Object
Description
Name
It is limited to use characters 0-9, a-z and A-Z. Repeating the same name is not possible.
Destination IP address
Router destination IP can be host IP address,and also can be IP segment.
Subnet Mask
The added subnet, if it is the host IP address , please input
255.255.255.255
Gateway IP address
The next IP of the added router, if gateway is not needed
, can be“0.0.0.0”
Metric
Default is 0
Interface
System interface
Note: If rout
er can’t be added successfully (add rules successfully, but router information didn’t display), please confirm NSID
whether to comply to requirements or not.
Gateway router configuration example:
