background image

 

8

 

2. Planning your Powerline Network 

With PLANET Powerline products, a network can be created using home powerline. 
Computers  can  be  networked  over  powerline  using  a  USB  Adapter  or  an  Ethernet 
converter.  Use  PL-104U  for  an  USB-enabled  computer  or  use  PL-104E  for  an 
Ethernet-enabled computer. The PL-104E is also ideal for any user who already has a 
router and wants to share high-speed Internet access across the powerline network. 
Connect  PL-104E  to  the  router  after  you  have  configured  it  using  the  Security 
Configuration Utility. Connect a straight-through UTP Category 5 cable to the uplink 
port of the router, or connect crossover UTP Category 5 cable to a LAN port on the 
router.   

 

 

All  the  powerline  devices  on  the  network  must  use  the  same  password  to 
communicate each other.    This password can be configured through the Powerline 
Configuration  utility  that  can  be  found  in  the  CD-ROM.    The  default  password  of 
PLANET powerline devices is 

HomePlug

.    Thus, all the PLANET powerline devices 

can communicate each other without prior password configuration.    Please refer to 
chapter 5 on detail of installing and using PLANET Powerline Configuration utility. 

Summary of Contents for Powerline Ethernet Bridge PL-104E
























Reviews: