17
“30W”
and
“60W+”
LED of POE-172S and the
“PoE-in-
Use”
of POE-171A series will light up continuously.
4. Connect a standard Ethernet cable from an Ethernet switch or
PC workstation to
“Ethernet”
port of POE-171A series.
5. Connect a standard Ethernet cable from
“Ethernet”
port of
POE-171S to the remote Ethernet device.
6. The remote device will be turned on.
12V/19V/24V
100 meters
Power
Data
PoE
Power
Data
DC
Digital
Signage
1000BASE-T UTP
PoE
1000BASE-T UTP with PoE
DC
Power Line (DC)
Ultra PoE Splitter
802.3bt PoE Injector
60 watts
POE-171A-60
POE-172S
Switch
Data
Power
AC-to-DC Adapter
110-240V AC
Figure 4:
Connected Architecture over POE-171A series and POE-172S
Note
1. According to IEEE 802.3af/at/bt Power over
Ethernet, the POE-171A series will not inject
power to the cable if not connected to IEEE
802.3af/at/bt device.
2. Please ensure the POE-172S output voltage is
correct before applying power to remote device.
The POE-172S provides DC12V/19V/24V power
output.
5.4 POE-171A series and POE-E304 Installation
1. Connect the power adaptor to
“52-56V DC IN”
of POE-171A
series; the
“PWR”
LED will be steadily on.
