Planet POE-151S-12V, User Manual

Page: 8 / 14

4
2.1 Hardware Installation
1. Connect a standard network cable from “EDC” of
POE-150 to “EDC” of POE-151S. The POE LED
of POE-150S/POE-150 will start to flash continuously.

Warning:
The POE-151S only accept IEEE 802.3af
power supply equipment, any other in-line
power device sending power through UTP wire
connect to POE-151S may cause the POE-151S
malfunction.
2. Connect the UTP cable in the package from “Ethernet” of
POE-151S to the RJ-45 port of remote device.
3. Connect proper DC plug from “DC OUT” of POE-151S to
remote device.

Caution
:
Please ensure the output voltage is correct
before applying power to remote device
4. Power on the remote device and the LED indicator on
POE-151S will remains on.