Planet POE-150, User Manual

Page: 12 / 22

8 9
G
Hint
1. Please check the power requirement of
the device that is going to get the power
from POE-150S. If the power require-
ment is higher than POE-150/150S can
supply, current overload will shutdown
the POE-150S itself. Those will shut-
down your device as well.
POE-150 and POE-150S can be installed in pair. However, the
use of third-party device is allowed if the device complied with
802.3af.
4.2 POE-150, the Injector installation
1. Connect a standard network cable from Hub/Switch to
“Ethernet” port of POE-150.
2. Connect the long cable that will be used to connect to
the remote device to the port “Et DC”.
3. In the other end of the cable, place the paster to the RJ-
45 cable as the figure below.
4. Connect the AC adapter to “48V DC” of POE-150. The
power LED will be steady on.
Figure 3: Warning paster location
4.3 POE-150S, the Splitter installation
1. Connect a standard network cable from “EDC”
of POE-150 to “EDC” of POE-150S. The POE