User’s Manual of POE-1200G / POE2400G
4.5.1 PoE Configuration
This section provides PoE (Power over Ethernet) Configuration and PoE output status of PoE Injector Hub, screen in
Figure 4-5-2
appears
and
Table 4-5-2
describes the PoE Configuration object of PoE Injector Hub.
Figure 4-5-2
PoE Configuration Web page screen
Object
Description
•
Power limit mode
Allow to configure power limit mode of Web Smart Device. It can choose :
Port Priority
Deliver PoE power by port priority setting
Total Limit
. Set limit value of the total POE port provided power to the PDs.
For POE-1200G, the total PoE power reservation from Port-1~12 is up to 190W.
For POE-2400G, the total PoE power reservation from Port-1~24 is up to 380W.
•
Over Temperature
Protection
Enabled to prevent system too hot to damage.
•
Temperature 1 Setting
Allow to set temperature of maximum prevention.
•
Temperature 2 Setting
Allow to set temperature of minimum prevention (Only for POE-2400G).
•
PoE Function
Can enable or disable the PoE port.
•
Priority
Set port priority for the POE power management.
It can choose the
“port priority”
, value is
“1~4”
. The highest priority is
“1”
.
39
