8
9
4.3 POE-100S – the splitter installation
1. Adjust the output voltage of POE-100S by moving the
switch to correct position, i.e. 12V, 7.5V, or 5V.
Caution:
Do not adjust the output voltage of POE-100S
while it is powered on. (i.e. PWR LED is steady
light green)
Figure 4: Output voltage switch on POE-100S
2. Connect a standard network cable from “EDC”
of POE-100 to “EDC” of POE-100S. The power
LED of POE-100S will be steady on.
Figure 5: Connection to POE-100S
Summary of Contents for POE-100
Page 5: ...2 This page is intentionally left blank...
Page 7: ...4 This page is intentionally left blank...
Page 18: ......
Page 19: ...Part No 2010 000016 101...