background image

Chapter 2:  Installation 
 
 

Overview 
 

The installation of 200M Ethernet Bridge will only take minutes.  No need to set 
up long wires through out the house, just simply install the utility, and physically 
plug the unit into the wall outlet, then to connect RJ-45 to the computer.  Users 
can select to adjust its security functions and the platform of the network after the 
installation.  For further assistance, please read our Frequently Asked Questions 
section in our Web site. 
 
 
 

Running the InstallShield Wizard 
 

Please verify that no other Powerline Management Utilities are installed before 
installing this product. If other utilities were installed, uninstall them and restart 
before installing this software. 
 
To install, insert the utility CD into the computer's CD-ROM drive. The main page 
shall pop up, then to press the link to install the software. Alternatively this can 
also be done manually by double clicking the setup.exe file on the CD. 

 
 
 

 

 

Microsoft .NET Framework 1.1

 is needed for installing PL-501 utility. The wizard will 

check automatically whether the 

Microsoft .NET Framework 1.1

 was installed on your 

PC or not. If not, the wizard will pop up a message box. Click OK to install.

 

 
 
 
 
 
 
 
 
 

 

9

Summary of Contents for PL-501-EU
















Reviews: