Setting Up Security on a Network Powerline device
The
Encryption
Tab will allow users to use one primary computer to control the
Network Key
of all units on the home network. Enter both the Remote Device
password in the
DAK Password
field and the desired
Network Key
in the field
provided. Click
“Set”
to save this value to the remote Powerline device. If the
DAK Password
is left blank, the
Network Key
will be saved to the local Powerline
device only.
All Powerline devices must use the same
Network Key
, or they will not be able to
communicate with each other.
Click Close to exit the PL-501 utility.
Setup is now complete.
If your PC is not the device you wish to use with the 200Mbps Powerline Ethernet
Adapter, connect the Ethernet cable from the 200Mbps Powerline Ethernet
Adapter to the desired device.
The 200Mbps Powerline Ethernet Adapter is now ready for using.
15