background image

 

9-Channel Network Video Recorder

 

NVR-915

 

 

 

3

WEEE Reg

Safety 

This equipment is designed with the utmost care for the safety of those who install and use it. 
However, special attention must be paid to the dangers of electric shock and static electricity 
when working with electrical equipment. All guidelines of this and of the computer 
manufacture must therefore be allowed at all times to ensure the safe use of the equipment. 
 

CE Mark Warning 

This is a Class B product. In a domestic environment, this product may cause radio 
interference, in which case the user may be required to take adequate measures. 
 

ulation 

To avoid the potential effects on the environment and human health as a result of 
the presence of hazardous substances in electrical and electronic equipment, end 
users of electrical and electronic equipment should understand the meaning of 
the crossed-out wheeled bin symbol. Do not dispose of WEEE as unsorted 
municipal waste and have to collect such WEEE separately. 

 

Energy Saving Note of the Device   

This power required device does not support Stand by mode operation.   
For energy saving, please remove the AC-plug to disconnect the device from the power 
circuit. 
Without remove the AC-plug or switch off the device, the devices will still consuming power 
from the power circuit. In the view of Saving the Energy and reduce the unnecessary power 
consuming, it is strongly suggested to switch off or remove the DC-plug for the device if this 
device is not intended to be active. 
 

Revision 

User’s Manual of PLANET 9-ch Network Video Recorder 
Model: NVR-915 
Rev: 1.0 (Jul, 2014) 
Part No. EM-NVR

-

915_v1.0

 

Summary of Contents for NVR-915


























































Reviews: