20
Step 5:
Prepare the twisted-pair, straight through Category 3, 4, 5, 5e, 6 cables
for Ethernet connection.
Step 6:
Insert one side of Category 3, 4, 5, 5e, 6 cables into the Industrial M12
Ethernet Switch Ethernet port (RJ-45 port) and another side of Category
3, 4, 5, 5e, 6 cables to the network devices' Ethernet port (RJ-45 port),
ex: switch, PC or Server. The UTP port (RJ-45) LED on the Industrial M12
Ethernet Switch will light up when the cable connected with the network
device. Please refer to the LED Indicators section for LED light meaning.
Step 7:
When all connections are all set and LED lights all show in normal, the
installation is complete.
Note
Be sure the connected network devices support MDI/MDI-X. If it
does not support then use the crossover Category 3, 4, 5, 5e, 6
cables.
Department/ Workgroup PoE Switch (ISW-804PT-M12 only)
Providing 4-Port PoE in-line power interface, the ISW-804PT-M12 can easily build
a power centrally-controlled IP phone system, IP Camera system and Wireless AP
group for the enterprise. For instance, up to 4 cameras can be installed around the
corner in the company for surveillance demands or up to 4 Wireless AP to build a
wireless roaming environment in the office. Without the power-socket limitation, the
Switch makes the installation of cameras or Wireless AP more easily and efficiently.
Outdoor PoE IP Camera
PoE VoIP ATA
PoE IP Phone
Phone
Data+Power
Data+Power
48V DC Power Input
DIN-Rail
Power Supply
DC
PC
PC
PC
PC
PoE
PoE
PoE
PoE
PoE Wireless AP
Laptop
N
N
DC
Power Line (DC)
100Base-TX UTP
PoE
100Base-TX UTP with PoE
Telephone wire
2.4GHz 802.11n
N
Industrial M12
PoE Ethernet Switch