17
Step 4:
Please refer to following procedures to remove the Industrial M12 Ethernet
Switch from the track.
Step 5:
Lightly press the button of DIN-Rail for remove it from the track.
2.2.2 Wall Mount Plate Mounting
To install the Industrial M12 Ethernet Switch on the wall, please follows the
instructions described below.
Step 1:
Remove the DIN-Rail from the Industrial M12 Ethernet Switch; loose the
screws to remove the DIN-Rail.
Step 2:
Place the wall mount plate on the rear panel of the Industrial M12
Ethernet Switch.
Step 3:
Use the screws to screw the wall mount plate on the Industrial M12
Ethernet Switch.
Step 4:
Use the hook holes at the corners of the wall mount plate to hang the
Industrial M12 Ethernet Switch on the wall.
Step 5:
To remove the wall mount plate, reverse steps above.