manualshive.com logo in svg

Planet ISW-1022M, User Manual, Page: 63 / 141

Share
Download
Planet ISW-1022M User Manual Download Page 63

User’s Manual of ISW-1022M 

63

 

5.5.4 Port Mirroring 

The Port mirroring is a method for monitor traffic in switched networks. Traffic through ports can be monitored by one 

specific port, which means traffic goes in or 

out monitored (source)

 ports will be duplicated into 

mirror (destination)

 

port. 

 

 

Figure 5-28 

Port Trunk – Port Mirroring interface 

 

 

The page includes the following fields: 

Object 

Description 

Destination Port:

 

There is only one port can be selected to be 

destination (mirror)

 port for 

monitoring both RX and TX traffic which come from source port. Or, use one of 

two ports for monitoring RX traffic only and the other one for TX traffic only. User 

can connect mirror port to LAN analyzer or Netxray. 

Source Port:

 

The ports that user wants to monitor. All monitored port traffic will be copied to 

mirror (destination) port. User can select multiple source ports by checking the 

RX

 or 

TX

 check boxes to be monitored. 

 

 

Summary of Contents for ISW-1022M














































































































































Reviews:

No comments