User’s Manual of ISW-1022M
10
Power 1 (Green)
Power 2 (Green)
Fault (Red)
Full duplex/Collision (Yellow)
SFP port: LNK/ACT(Green)
1000T: LNK/ACT(Green), 1000M(Green)
Console Interface
One RJ-45-to –RS-232 male connector for switch management
Power Supply
External Power Supply: DC 12~48V, Redundant power DC 12~48V and
connective removable terminal block for master and slave power
Power Consumption
9.5 Watts (Full load)
Operating Temperature
Standard: -10 Degree C ~ 60 Degree C
Operating Humidity
5% to 95% (Non-condensing)
Storage Temperature
-40 Degree C ~ 85 Degree C
Case Dimension
IP-30, 72mm (W) x 105mm (D) x 152mm (H)
Management Functions
Management Interface
Console, Telnet, Web Browser, SNMP v1, v2c and v3
Port Configuration
Port disable/enable.
Auto-negotiation 10/100Mbps full and half duplex mode selection.
Flow Control disable / enable. Bandwidth control on each port.
Port Status
Display each port’s speed duplex mode, link status, Flow control status. Auto
negotiation status
VLAN
Port-Based VLAN, up to 9 VLAN groups
IEEE 802.1q Tagged Based VLAN , 4K VLAN ID, up to 256 VLAN groups
Spanning Tree
IEEE 802.1d Spanning Tree
IEEE 802.1w Rapid Spanning Tree
Link Aggregation
Supports 12 groups of 8-Port trunk support
QoS
Traffic classification based on :
Port Number,
802.1Q Tag,
802.1p priority,
IP DSCP/TOS field in IP Packet
IGMP Snooping
v1 and v2
256 multicast groups and IGMP query
Bandwidth Control
Per port bandwidth control
Ingress: 500Kb~80Mbps
Egress: 64Kb~80Mbps
Port Mirror
RX/TX/Both
Security
Support 100 entries of MAC address for static MAC and another 100 for MAC filter
Support 10 IP addresses that have permission to access the switch management
and to prevent unauthorized intruder