background image

 

Internet Telephony PBX System 

IPX-330 

Chapter 1 Introduction   

Intuitive, Ease-of-Use IP PBX Machine Management

 

PLANET IPX-330 IP PBX telephony system is SIP based and optimized for the small and 

medium business in daily communications. The IPX-330 is able to accept 

30 user 

registrations

, and easy to manage a full voice over IP system with the convenience and cost 

advantages. 

 

Off-net Calling Capability, Call Restriction, Call Access Control 

The IPX-330 is a feature-rich PBX system that supports seamless communications between 

existing PSTN calls, analog, IP phones and SIP-based endpoints. 

 

Replaces old PBX directly without any new wiring   

Cost-effective, easy-to-install and simple-to-use, the IPX-330 converts standard telephones 

into IP-based networks. It enables the service providers and enterprises to offer users 

traditional and enhanced telephony communication services via the existing broadband 

connection to the Internet or corporation network. 

 

With the IPX-330, home users and companies are able to save the installation cost and extend 

their past investments in telephones, conferences and speakerphones. The IPX-330 can be 

the bridge between traditional analog systems and IP network with an extremely affordable 

investment. 

 

8

Summary of Contents for IPX-330

































































































Reviews:

Related manuals for IPX-330