Planet IPX-330 User Manual Download

Page: 27 / 96

Internet Telephony PBX System

IPX-330

VoIP Trunks

1.Click

【

VoIP Trunk

】

【

New VoIP Trunk

】

Item

Explanation

Description

Define the VoIP(figure or character).

Protocol

Select protocol for outbound route, SIP or IAX2.

Host

Set host address (provided by VoIP Provider).

Maximum Channels

Set maximum channels for simultaneous call. (Only for outbound

call; “0” = no limitation).

Prefix

The prefix will be added in front of your dialed number automatically

when the trunk is in use.

Caller ID

This Caller ID will be displayed when user make outbound call.

Note: This function must be supported by local provider.

Without

Authentication

If you don’t need the Authentication when connecting the IP PBX,

please check this option.

User Name

User Name provided by VoIP Provider.

Summary of Contents for IPX-330

































































































Search results

Summary of Contents for IPX-330

Reviews:

Related manuals for IPX-330

Brands by name

Popular brands

Planet IPX-330, User Manual

Search results

Summary of Contents for IPX-330

Reviews:

Related manuals for IPX-330

Brands by name

Popular brands