Internet Telephony PBX System
IPX-2500
90
Item
Explanation
Hot Standby Mode:
Set the unit to be Master or Slave (Make sure one unit is
Master and the other is Slave)
Local Hostname
Hostname of local unit (Make sure it’s different on two units)
Remote Hostname
Hostname of remote unit
Local IP
IP address of local unit
Local Heart Line Port:
Heart line port of local unit (Make sure local heart line port of
local unit is the same
as remote heart line port of remote unit)
Local Port:
Port of local unit (Default is suggested, and make sure port on
both units are the same)
Remote IP:
IP address of remote unit
Remote Heart Line Port
Heart line port of remote unit
Remote Port
Port of remote unit
Virtual IP
Virtual IP address (on which IP extensions will be registered)
SYNC Network Rate
Rate of Sync Network (Retain default)
Status Fresh Time(sec)
：
Fresh rate of status (Retain default)
Remote Link
Timeout(sec):
Timeout for remote link (retain default)
Administrator Email:
Email address of administrator (In case the device is working
improperly, notification
will be sent to this email address)
