Planet IPX-2500 User Manual Download

Page: 33 / 102

Internet Telephony PBX System

IPX-2500

Item

Explanation

Port

Select the port for outbound line.

Label

Set a label for this port. When incoming calls are from this port,

the label will be displayed.

Destination

Incoming calls will access directly to this destination (extension user,

call queue, conference, or IVR).

Number DIDs

If user wants to make an outbound line (VoIP Trunk) access to the specified extension

/ queue

/ conference

IVR, please use this feature:

Click

【

Number DID

】

【

New Number DID

】

Item

Explanation

DID Number

DID number calling into VoIP (This number is configured in the

advance option of VoIP trunk).

Destination

Choose a specified extension, call queue, conference or IVR to be

directed to call.

Summary of Contents for IPX-2500







































































































Search results

Summary of Contents for IPX-2500

Reviews:

Related manuals for IPX-2500

Brands by name

Popular brands

Planet IPX-2500, User Manual

Search results

Summary of Contents for IPX-2500

Reviews:

Related manuals for IPX-2500

Brands by name

Popular brands