11
5. Hardware Installation
5.1 Before Installation
If there is no power socket in your network environment,
the IPOE-171S provides DC power for this Ethernet Device
conveniently and easily. The IPOE-171S will separate the power
and data out. It provides two kinds of DC power output through
its DIP switch and its voltage and current shown below:
Power Output
12V
12V 24V
DC Voltage
24V
V+
V+
V
V
Figure 3:
DIP Switch of IPOE-171S
Please check the power requirements of the
device carefully, that is going to get the power
from IPOE-171S.
If the power requirement is higher than the
IPOE-171S can supply, current overload might
shut down the IPOE-171S itself. Thus, it will
also shut down your device as well.
Please ensure the output voltage is correct for
remote device. Otherwise, it will damage your
remote device.
