Planet Internet Telephony PBX System IPX-300 Series User Manual Download

Page: 90 / 96

Appendix G

IP PBX Voice Sounds

PBX-files

agent-pass.WAV:

Please enter your password followed by the pound key.

auth-incorrect.WAV:

Password incorrect. Please enter your password followed by the pound key.

auth-thankyou.WAV:

Thank you

beep.WAV:

"beep tone"

beeperr.WAV:

"beep tone"

offduty.WAV:

Now is off hour , if you know the extension of the party "you" wish to reach, dial now, or

call again tomorrow

onduty.WAV:

Thank you for calling, if you the extension of the party "you" wish to reach dial now, or

dial 9 for operator.

pbx-invalid.WAV:

I am sorry, that's not a valid extension. Please try again

pbx-invalidpark.WAV:

I am sorry, there is no call parked on that extension. Please try again.

playoffduty.WAV:

Now play off duty prompt voice

playonduty.WAV:

Now play on duty prompt voice

recordoffduty.WAV:

To record off duty prompt voice, please press 1 after the beep sound start

recording, to finishing recording please press pound key, press 2 to exit the system

recordonduty.WAV:

To record on duty prompt voice, please press 1 after the beep sound start

recording, to finishing recording please press pound key, press 2 to exit the system

thank-you-for-calling.WAV:

thank you for calling

conf-adminmenu:

Please press 1 to mute or unmute yourself, 2 to lock or unlock the conference, 3 to

eject the last user, 4 or 6 to decrease or increase the conference volume, 7 or 9 to decrease or increase

your volume, or 8 to exit

conf-enteringno:

You are entering conference number

conf-errormenu:

Invalid Choice

conf-getchannel:

Please enter the channel number followed by the pound key.

conf-getconfno:

Please enter your conference number followed by the pound key.

conf-getpin:

Please enter the conference pin number.

conf-hasjoin:

is now in the conference.

conf-hasleft:

has left the conference.

conf-invalid:

That is not a valid conference number. Please try again.

conf-invalidpin:

That pin is invalid for this conference.

conf-kicked:

You have been kicked from this conference

conf-leaderhasleft:

The leader has left the conference.

conf-locked:

This conference is locked!

conf-lockednow:

The conference is now locked

conf-muted:

You are now muted

Summary of Contents for Internet Telephony PBX System IPX-300 Series

































































































Search results

Summary of Contents for Internet Telephony PBX System IPX-300 Series

Reviews:

Related manuals for Internet Telephony PBX System IPX-300 Series

Brands by name

Popular brands

Planet Internet Telephony PBX System IPX-300 Series, User Manual

Search results

Summary of Contents for Internet Telephony PBX System IPX-300 Series

Reviews:

Related manuals for Internet Telephony PBX System IPX-300 Series

Brands by name

Popular brands