Figure 7. Wizard-Internet settings
AP Setting (For IPX-300W)
For configuring correctly the WLAN port in client mode, the below instructions will
provide a quick start. It is advised if possible to use the simplest network settings
for first try.
For making sure the IP PBX is connecting to your wireless router (AP). You need
to set up the following: SSID, Frequency Channel, Authentication method and
Encryption parameters (Type/Encryption length/Keys.)
Figure 8. Wizard-AP settings
Step3. NAT Setting
LAN IP Setting
LAN IP Address
Private IP address for connecting to a local private
network. (Default: 192.168.0.1)
Subnet Mask
Subnet mask for the local private network (Default:
255.255.255.0)
